My Tire Guide

295/35R24 tire size

A 295/35R24 tire stands 32.1 inches tall and 11.6 inches wide, with a 4.1-inch sidewall on a 24-inch rim.

32.1″OVERALL 32.1 IN · RIM 24 IN11.6″4.1″WIDTH · SIDEWALL
Overall height
32.1 in816 mm
Section width
11.6 in295 mm
Sidewall height
4.1 in103 mm
Rim diameter
24 in610 mm
Circumference
100.9 in2564 mm
Revolutions per mile
628390 per km
Inch size
32.1x11.6R24

Compare it with any other size in the tire size calculator.

Sizes you can swap to

These 24-inch sizes are within two width steps and 3% of a 295/35R24's overall height, the usual limit before the speedometer, ABS and transmission notice. The closest is 305/35R24, 0.9% taller (0.28 in). Wider sizes also need room in the wheel well and a rim width that suits them.

SizeHeightWidthAt 60 mph
305/35R24+0.9%+0.28 in+10 mm60.5 mph
285/35R24−0.9%−0.28 in−10 mm59.5 mph
275/40R24+1.7%+0.53 in−20 mm61.0 mph
275/35R24−1.7%−0.55 in−20 mm59.0 mph
315/35R24+1.7%+0.55 in+20 mm61.0 mph
315/30R24−2.1%−0.69 in+20 mm58.7 mph
285/40R24+2.6%+0.85 in−10 mm61.6 mph
305/30R24−2.9%−0.93 in+10 mm58.3 mph

Plus and minus sizes

Changing rim size means changing the sidewall to keep the same overall height. On 22-inch rims, these are the closest matches to a 295/35R24.

SizeHeightWidthAt 60 mph
285/45R22−0.1%−0.03 in−10 mm59.9 mph

Other 24-inch sizes near 295/35R24

295 mm wide, other sidewalls

35 series, other widths

See the other sizes for this rim on 24-inch tire sizes.

Shop 295/35R24 tires

These open each store's own list of 295/35R24 tires, where you can filter by type, load and speed rating.

295/35R24 questions

How tall is a 295/35R24 tire?

About 32.1 inches (816 mm) from the ground to the top of the tread, unloaded. On the vehicle, carrying weight, it sits a little lower.

What does 295/35R24 mean?

295 is the section width in millimetres (11.6 in). 35 means the sidewall is 35% of that width: 103 mm, or 4.1 in. R means radial construction, and 24 is the rim diameter in inches.

Can I use 305/35R24 instead of 295/35R24?

305/35R24 is 0.9% taller (0.28 in) and 10 mm wider, which is inside the usual 3% rule. With it fitted, the speedometer shows 60 mph when you are doing 60.5 mph. Make sure the extra width clears the suspension and fender liner at full lock.

What is 295/35R24 in inches?

In inch terms it is 32.1x11.6R24: 32.1 inches tall, 11.6 inches wide, for a 24-inch rim.

How many revolutions per mile does a 295/35R24 make?

About 628 turns per mile, worked out from its unloaded circumference of 100.9 inches. Makers list slightly higher numbers for their own tires, because a loaded tire rolls on a smaller radius.