My Tire Guide

295/30R24 tire size

A 295/30R24 tire stands 31.0 inches tall and 11.6 inches wide, with a 3.5-inch sidewall on a 24-inch rim.

31.0″OVERALL 31.0 IN · RIM 24 IN11.6″3.5″WIDTH · SIDEWALL
Overall height
31.0 in787 mm
Section width
11.6 in295 mm
Sidewall height
3.5 in89 mm
Rim diameter
24 in610 mm
Circumference
97.3 in2471 mm
Revolutions per mile
651405 per km
Inch size
31.0x11.6R24

Compare it with any other size in the tire size calculator.

Sizes you can swap to

These 24-inch sizes are within two width steps and 3% of a 295/30R24's overall height, the usual limit before the speedometer, ABS and transmission notice. The closest is 285/30R24, 0.8% shorter (0.24 in). Wider sizes also need room in the wheel well and a rim width that suits them.

SizeHeightWidthAt 60 mph
285/30R24−0.8%−0.24 in−10 mm59.5 mph
305/30R24+0.8%+0.24 in+10 mm60.5 mph
275/30R24−1.5%−0.47 in−20 mm59.1 mph
315/30R24+1.5%+0.47 in+20 mm60.9 mph
275/35R24+2.0%+0.61 in−20 mm61.2 mph
285/35R24+2.9%+0.89 in−10 mm61.7 mph

Plus and minus sizes

Changing rim size means changing the sidewall to keep the same overall height. On 22-inch rims, these are the closest matches to a 295/30R24.

SizeHeightWidthAt 60 mph
285/40R22+0.0%+0.01 in−10 mm60.0 mph

Other 24-inch sizes near 295/30R24

295 mm wide, other sidewalls

30 series, other widths

See the other sizes for this rim on 24-inch tire sizes, or other tires about this tall on 31-inch tires.

Shop 295/30R24 tires

These open each store's own list of 295/30R24 tires, where you can filter by type, load and speed rating.

295/30R24 questions

How tall is a 295/30R24 tire?

About 31.0 inches (787 mm) from the ground to the top of the tread, unloaded. On the vehicle, carrying weight, it sits a little lower.

What does 295/30R24 mean?

295 is the section width in millimetres (11.6 in). 30 means the sidewall is 30% of that width: 89 mm, or 3.5 in. R means radial construction, and 24 is the rim diameter in inches.

Can I use 275/30R24 instead of 295/30R24?

275/30R24 is 1.5% shorter (0.47 in) and 20 mm narrower, which is inside the usual 3% rule. With it fitted, the speedometer shows 60 mph when you are doing 59.1 mph.

What is 295/30R24 in inches?

In inch terms it is 31.0x11.6R24: 31.0 inches tall, 11.6 inches wide, for a 24-inch rim.

How many revolutions per mile does a 295/30R24 make?

About 651 turns per mile, worked out from its unloaded circumference of 97.3 inches. Makers list slightly higher numbers for their own tires, because a loaded tire rolls on a smaller radius.