275/35R20 tire size
A 275/35R20 tire stands 27.6 inches tall and 10.8 inches wide, with a 3.8-inch sidewall on a 20-inch rim.
- Overall height
- 27.6 in701 mm
- Section width
- 10.8 in275 mm
- Sidewall height
- 3.8 in96 mm
- Rim diameter
- 20 in508 mm
- Circumference
- 86.6 in2201 mm
- Revolutions per mile
- 731454 per km
- Inch size
- 27.6x10.8R20
Compare it with any other size in the tire size calculator.
Sizes you can swap to
These 20-inch sizes are within two width steps and 3% of a 275/35R20's overall height, the usual limit before the speedometer, ABS and transmission notice. The closest is 285/35R20, 1.0% taller (0.28 in). Wider sizes also need room in the wheel well and a rim width that suits them.
Plus and minus sizes
Changing rim size means changing the sidewall to keep the same overall height. On 18-inch or 19-inch or 21-inch rims, these are the closest matches to a 275/35R20.
Other 20-inch sizes near 275/35R20
275 mm wide, other sidewalls
- 275/40R2028.7″
- 275/45R2029.7″
- 275/50R2030.8″
- 275/55R2031.9″
- 275/60R2033.0″
- 275/65R2034.1″
- 275/70R2035.2″
- 275/75R2036.2″
35 series, other widths
See the other sizes for this rim on 20-inch tire sizes.
Shop 275/35R20 tires
These open each store's own list of 275/35R20 tires, where you can filter by type, load and speed rating.
275/35R20 questions
How tall is a 275/35R20 tire?
About 27.6 inches (701 mm) from the ground to the top of the tread, unloaded. On the vehicle, carrying weight, it sits a little lower.
What does 275/35R20 mean?
275 is the section width in millimetres (10.8 in). 35 means the sidewall is 35% of that width: 96 mm, or 3.8 in. R means radial construction, and 20 is the rim diameter in inches.
Can I use 285/35R20 instead of 275/35R20?
285/35R20 is 1.0% taller (0.28 in) and 10 mm wider, which is inside the usual 3% rule. With it fitted, the speedometer shows 60 mph when you are doing 60.6 mph. Make sure the extra width clears the suspension and fender liner at full lock.
What is 275/35R20 in inches?
In inch terms it is 27.6x10.8R20: 27.6 inches tall, 10.8 inches wide, for a 20-inch rim.
How many revolutions per mile does a 275/35R20 make?
About 731 turns per mile, worked out from its unloaded circumference of 86.6 inches. Makers list slightly higher numbers for their own tires, because a loaded tire rolls on a smaller radius.